Petroleum / In-flow Density and Viscosity Meter

In-flow Density and Viscosity Meter DC-52
DC-52

- No pressure effect
- Insensitive to plant vibration
- Continuous real time measurement
- No remote electronics
- Self-cleaning
- Low/no maintwnance
- Fast response
- Hazardous area installation

Overview
DC- 52 series of process meters has been carefully engineered to fit large range of applications within the oil and gas, petrochemical, chemical, food processing and other industries.

Use the proven vibrating element technique that is widely accepted as the most accurate method of continuous online density measurement, LEMIS process engineers did new step ahead introducing unique proprietary design of streamlined resonant tube that is washed on either side by measured liquid. The oscillation period of the vibrating tube and its frequency characteristics depend on behaviour of the measured liquid allowing simultaneous and accurate direct measurement of both density and dynamic viscosity, and future calculation of kinematic viscosity. An integral high accuracy Pt100 temperature probe provides liquid temperature measurement that allows calculation of reference density and viscosity.

The DC52 series sensor made from stainless steel for general industrial use or from Ni-SpanC for most demanding applications asking for ultimate accuracy in wide temperature range.
Documentation
file BROCHURE IN-FLOW DENSITY METERS DC-52 SERIES (DC-52_o.pdf, 3.30 MB)
Specifications

Dynamic Viscosity Range

0.2 to 2000 mPa·s (0.2 to 2000 cP)

Dynamic Viscosity Accuracy

±1% of span

Viscosity Resolution

0.1 mPa*s (0.1 cP)

Dynamic Viscosity Repeatability

±0.5% of span

Density Range

0 to 3 g/cm³ (0 to 3000kg/m³)

Density Accuracy

Up to ±0.00025 g/cm³ (up to ±0.25 kg/m³)

Density Resolution

±0.0001 g/cm³ (±0.1 kg/m³)

Density Repeatability

Up to ±0.000125 g/cm³ (up to ±0.125 kg/m³)

Temperature Range

-200°C to +200°C (-328°F to +392°F)

Temperature Accuracy

±0.2°C (±0.4°F)

Pressure Range

Up to 100 Bar

Ambient temperature

-40°C to +85°C (-40°F to +185°F)

Viscosity compensation

Automatic

Temperature compensation

Automatic

 

 

Applications
- Fuel oil /crude oi blendning
- Pipeline interface detection
- Quench oil control
- Fuel oil heater control
- Oil and petrochemical
- Marine industry
- General industries